help for diagnostic mode

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › help for diagnostic mode

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 17, 2009 at 6:10 am #47841
    blackduck
    Participant

    Can someone please tell me how I get into diagnostic mode with my machine. It was given to me without a manual. It is a fisher &paykel smart drive pride mw059au. I am having a fair bit of trouble with it……and how do I find out what the errors are. I really need some help. Thanks

    August 17, 2009 at 8:26 am #294768
    Penguin45
    Participant

    Re: help for diagnostic mode

    STICKY.

    Penguin45.

    August 17, 2009 at 8:36 am #294769
    blackduck
    Participant

    Re: help for diagnostic mode

    Thankyou so very much…………and especially for giving me help so quickly. I will do as you ask and get back to you with the errors.

    August 19, 2009 at 4:25 am #294770
    blackduck
    Participant

    Re: help for diagnostic mode

    Penguin45 wrote:STICKY.

    Penguin45.

    Ok here are the codes
    2+4+8+16+32

    I was told I needed a new computer board thing. I put one in and it blew up!!! Not good! put in another one and it washes and stops before it finishes draining. All lights go out, but will turn back on after a while.I think it might be the pump,but I wanted to check here first before I got a new one.
    Thanks for any help.
    Cheryl

    August 19, 2009 at 11:55 pm #294771
    Penguin45
    Participant

    Re: help for diagnostic mode

    62 is the pump fault code. They wear out and also get wet due to leakage.

    Penguin45.

    August 20, 2009 at 12:18 am #294772
    blackduck
    Participant

    Re: help for diagnostic mode

    Thankyou so much for your help
    Cheers

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.