- This topic has 6 replies, 5 voices, and was last updated 16 years, 7 months ago by
.
-
Posts
-
beko wm wma641w cust says wont drain. went to it sump clear. drain hose clear. pump runs but wudnt drain. fitted new pump and new hose. sink clear an wont drain to a bucket either mad, dont get it crazy. when up take filter out water goes in to basin from sump. tryed with filter out tippt back, and water comes squirting out wee hole back inti pump housing . its got the hose wi extra wee pipe tha goes to housing . any help guys, doin ma nut 😳
Re: mysified
I would take off the sump hose again and make sure there’s not a plastic bag or something getting sucked against the tub outlet.
Re: mysified
had this the other day on a whirlpool build in and was tearing my hair out over it. after changing all the drain hoses and the continer/air break at the back it turned out to be the filter! No not blocked, but broken. The customer had cleaned it recently and as it was stuck in, she forced it out, breaking the outer cage of the filter in the process which she just binned, replacing the filter without this. Must admit, even to me I couldnt see anything missing as some filters are just simple ‘mushroom’ shape anyway. As this one did not form the seal around the pump impellor there was no pumping action at all, the impellor just spun around uselessly splashing the water around inside. Might be worth a closer look at the filter in your case, adv
- You must be logged in to reply to this topic.