- This topic has 5 replies, 4 voices, and was last updated 16 years, 7 months ago by
.
-
Posts
-
Hi guys,
I have this dishwasher and at the start of the cycle it pumps out as per normal when it goes to fill it just pumps out for a second then stops, then pumps out again. It pulses like this continuosly in time with the start light going on and off. I was thinking it was the flood switch but there doesnt seem to be one. I dont want to change the flow metre as you have to buy it with the tank and that could be costly if its not the problem. Im stumped. Anyone got any ideas. It also wont go into test.
PaddyRe: whirlpool adg4500
Ah 😀
That’ll be the exact same fault as I was going to post for a Diplo ADP8502.Ta Gents
TC
Re: whirlpool adg4500
i’ve just read this after posting a very similar if not identical thread. when i get back from hols i’ll get the soldering iron onto this thing and let you know what happens. also there are threads about the flow meters on here somewhere cos i repair the boards by buy reed switches from c.p.c.
do a search and you get the info.
also if you get this one sorted please tell us how you did it
thanks
keithRe: whirlpool adg4500
Let me know how you go with the soldering iron…..this machines pretty new and at the moment its a scrapper in my workshop…..shame to bin it…everything pointing to the pcb but I aint replacing it as the askoll motor hasnt been replaced in it yet either….Im sure its ready to blow should I put replace the pcb 🙂
- You must be logged in to reply to this topic.