- This topic has 1 reply, 2 voices, and was last updated 16 years, 7 months ago by
.
-
Posts
-
this is the usual machine with the on/off button on right side and the P program selector on the left.
problem here is that it wont let me select a program for a wash. the program indicator lights will not illuminate. however if you turn machine of theres a feable beep and one quickly lights up and fades out.
i have run the test sequence and can get it to do everything except run the drain pump. the pump has been changed and it’s still the same. the machine does not give any error beeps or lights. the original pump was leaking i suspected damage to p.c.b but no visual damage can be seen.
any ideas please.
thanksRe: naardi/merloni integrated dishwasher
If the d/w does everything as you say it does ie fills,wash motor starts,heats,but does not pump out the only thing i can think of is the pcb is up the creek.What voltage, if any, do you get to the pump?Not having any visual signs of damage to the pcb means very little and i should think it is most likely this pcb that is u/s based on experience and from what you say.-fingers x`d it is.
- You must be logged in to reply to this topic.