Servis Pump

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Servis Pump

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 3, 2009 at 2:41 pm #48301
    subs
    Participant

    M6712s. Im after an outlet pump and i suppose filter housing for this machine but masterpart dont list it and connect want £39+ for it, the same price as espares retail!

    Any help please?

    Subs

    September 3, 2009 at 3:05 pm #296227
    petalpop
    Participant

    Re: Servis Pump

    if you only need the pump motor i always fit 5031681640693

    September 3, 2009 at 3:18 pm #296228
    subs
    Participant

    Re: Servis Pump

    But the pump on my machine is a bayonet fitting and not a press and screw!

    Subs

    September 3, 2009 at 4:21 pm #296229
    cornwell40
    Participant

    Re: Servis Pump

    I’ve tried all my pump motors on these in the past and unfortunately only the gen one fits 😥

    TC

    September 3, 2009 at 4:34 pm #296230
    timdowning
    Participant

    Re: Servis Pump

    I too have tried all the normal pumps but to no avail.

    The following was said by robbra but I haven’t tried it myself.

    You can screw a Plaset or Askoll to the flanges if you are careful and use some sealant

    I would imagine you need thinner screws than what come with the pumps?

    September 3, 2009 at 8:58 pm #296231
    subs
    Participant

    Re: Servis Pump

    Its what i thought, but thanks guys!

    Subs

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.