FISHER & PAYKEL Intutive IW811 Service Manual wanted

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › FISHER & PAYKEL Intutive IW811 Service Manual wanted

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • September 4, 2009 at 5:31 am #48327
    SoloTech
    Participant

    Hi,

    Would anyone have a service manual, which includes printed circuit boards, available for download, please.

    Thanks.

    September 4, 2009 at 9:19 pm #296289
    Penguin45
    Participant

    Re: FISHER & PAYKEL Intutive IW811 Service Manual wanted

    Hi ST,
    Welcome aboard, I’ll see what I can find… 😉

    Penguin45.

    September 4, 2009 at 9:33 pm #296290
    SoloTech
    Participant

    Re: FISHER & PAYKEL Intutive IW811 Service Manual wanted

    Thanks P45. Much appreciated. 🙂

    February 12, 2010 at 10:45 am #296291
    tbtd
    Participant

    Re: FISHER & PAYKEL Intutive IW811 Service Manual wanted

    Penguin45 wrote:Hi ST,
    Welcome aboard, I’ll see what I can find… 😉

    Penguin45.
    Hi P45 you sound very knowledgeable on the F& P machine I have the same machine and am also looking for a service manual for it .I have a similar issue of error 136 occurring during rinse 1 or rinse 2.I understand this relates to the motor stalling .I have dismantled the motor and it looks like new and is very free to rotate and shows no signs of water ingression or corrosion the same with the controller and the wiring.Any ideas?
    your help would be most appreciated

    February 12, 2010 at 10:38 pm #296292
    bigsmokepiker
    Moderator

    Re: FISHER & PAYKEL Intutive IW811 Service Manual wanted

    More cases than not likely Motor controller Fault (Main Module)
    In some instances can be RPS(rotor postion sensor)This is the smaal PCB Clipped Into Motor

    February 12, 2010 at 11:59 pm #296293
    tbtd
    Participant

    Re: FISHER & PAYKEL Intutive IW811 Service Manual wanted

    bigsmokepiker wrote:More cases than not likely Motor controller Fault (Main Module)
    In some instances can be RPS(rotor postion sensor)This is the smaal PCB Clipped Into Motor

    .
    Thanks for your reply i inspected the PCB embedded in the motor besides a little dust it appeared to “look” ok.
    From the diagnostics on the machine I was able to see the rpm feedback from I assume this sensor and it appeared to be reading consistently when i moved the bowl by hand and when the motor drove the bowl as well so I have more or less ruled it out.It just seems bizarre that it only does it during the rinse cycles??

    June 28, 2010 at 3:13 am #296294
    grouts
    Participant

    Re: FISHER & PAYKEL Intutive IW811 Service Manual wanted

    Hi,
    I am also looking for a service guide for this IW811 machine.
    mine sometimes (when it does turn on) says..
    “I need Service, Fault code 10”
    The rest of the time when applying AC the unit just blinks all the LEDs and LCD backlight.
    Or at other times Nothing happens at all.

    I’m guessing the error 10 might be the clue to the cause..
    i.e. something dragging down the power for the logic to operate ?

    Any help or direction to a service manual would be appreciated.

    Thanks

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.