Bosch WTL 6102gb/01 Condensor dryer

This topic has 1 reply, 2 voices, and was last updated 16 years, 7 months ago by mike100.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
September 4, 2009 at 12:54 pm #48336

mike100
Participant

When you switch on the dryer will run but the display will show end and there is no heat. The reset button is ok. Has the element gone and if so do you know the part no.
Thanks
mike

September 4, 2009 at 1:56 pm #296313

Martin
Participant

Re: Bosch WTL 6102gb/01 Condensor dryer

More likely the relay on the PCB has gone AWOL or just a dry joint on the board needs a soldering iron maybe?

Have you not checked the element though? :con:

Please Note : The PCB is at a premium, mind-numbing cost so tread with care!!!! 😉
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.