- This topic has 5 replies, 3 voices, and was last updated 22 years, 5 months ago by
.
-
Posts
-
Hi,
Im hoping somebody can help me. I need to know how to activate the self test sequence on the WMA range, inparticularly WMA31 aquarius. I’ve got all the fault diagnosis sheets but I’ve not got the sequence to activate the test programme.
I know its something to do with the first 3 option buttons but cannot remember exactly.Thanks in advance for your help guys.
I have to phone them tomoorrow about a problem we have, I’ll ask the question while I’m on to them, if I can find anyone who is allowed to tell me anything that is 😉
Dave.
Hi to activate the test program do the following –
1. Ensure prog selector is set to off or zero position
2. Press option buttons 2 & 3 (assuming 1 is at left) for 5 secs whilst selecting F on prog selector
3. Options 2 & 3 (prewash and wash LEDs will flash) Press start for 2 secs
4. Options 2 & 3 leds will flash to confirm selection of component test
5. Select a program postion a to h depending on component
press start and release button
6. Options 2 3 led will stop flashing and illuminate permanently to indicate test in progress
7. The component being tested will cycle on and off at 1 second intervals except the door lock will energise and deenergise.
8. To stop test press start and release button. Options 2 & 3 leds will flash.Hope this helps – Cheers = Bonz
to test another copmonent return to 5
j When test test completer swith prog selector to off or 0
- You must be logged in to reply to this topic.