Aquastop assembly [AEG 72850A Lavamat Washing M/C]

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Aquastop assembly [AEG 72850A Lavamat Washing M/C]

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 23, 2009 at 5:16 pm #48812
    jedpause
    Participant

    Hi all, just received a AEG/Electrolux Lavamat 72850A yesterday as old M/C was leaking. Has E10 errors and problems (inlet valve problem), even though water came in fairly slowly.

    Have attached hose as per manufacturer instructions, dozens of times, checked for blockages behind hose filters etc., nothing, brand new. Anyway tonight I disassembled Aquastop unit on hose (not the electrical type) and reassembled… and water seems to be going in fine now… BUT here’s my problem:

    I am not sure which way the little magnet should go into the unit! It works now but not sure if proper protection is enabled with the way I put the magnet in!

    Help, thanks, Jed

    September 23, 2009 at 5:45 pm #297807
    Phidom
    Participant

    Re: Aquastop assembly [AEG 72850A Lavamat Washing M/C]

    I’ve found those things to be more trouble than they are worth. I usually just fit an ordinary hose instead, especially on integrated machines that can’t readily be pulled out.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.