HOOVER HNMF

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HOOVER HNMF

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • September 23, 2009 at 7:42 pm #48819
    washermanuk
    Participant

    Any ideas how to fit a fridge temp sensor (part no 91201875)
    on a Hoover HNMF 280SA-80
    Already had a look and it seems impossible to feed it through into evap? 😕
    all the wires from the module go down one hole and are all taped together? No lid to take off to gain access from the top, and only the space of a letter box :rolls: when module removed at front!!!!
    and there is no access from the back 😥
    have spoken to Gias tech no help there just said cut into foam 👿
    Please help before i go insane with a very large hammer 😆

    September 24, 2009 at 8:36 am #297828
    electrofix
    Moderator

    Re: HOOVER HNMF

    dont repair fridges but what gias said sounds about right

    have talked to many engineers who have to cut a hole in the insulation attach thermistor and reseal also re-routing wires to connect up

    mad i know but the thermistors are put in before case is sealing in manufacture

    hope this helps

    Dave

    September 24, 2009 at 10:04 am #297829
    Penguin45
    Participant

    Re: HOOVER HNMF

    Sent you some stuff.

    Chris.

    September 24, 2009 at 6:19 pm #297830
    washermanuk
    Participant

    Re: HOOVER HNMF

    THANKS GUYS A BIG HELP 😉
    CHRIS DID YOU SEND THAT STUFF TO MY WORKS EMAIL?

    September 24, 2009 at 7:44 pm #297831
    Penguin45
    Participant

    Re: HOOVER HNMF

    I sent it to the one in your profile. Please advise if that is correct or not, as I have a bounce notification.

    Chris.

    September 24, 2009 at 11:30 pm #297832
    washermanuk
    Participant

    Re: HOOVER HNMF

    Hi Chris my email is correct on my profile,
    might be my end will try and sort it , if you can resend info please send here info@electricalsales.co.uk
    Many thanks BRIAN

    September 24, 2009 at 11:37 pm #297833
    Penguin45
    Participant

    Re: HOOVER HNMF

    Re-sent to addy above.

    Chris.

    September 25, 2009 at 8:44 pm #297834
    washermanuk
    Participant

    Re: HOOVER HNMF

    Thanks Chris (aka penquin45) got the info!
    I now know why i hate fixing fridge freezers :rolls:
    Looks aright performance
    What puzzles me? why did’nt Gias tell me about the tech bulletin when i spoke to them? for gods sake we have a account with them?
    Thanks again im really going to enjoy doing that one (NOT)

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.