Smeg 612 ss leaking underneath

Home Forums Public Support Forums Help And Support Dishwasher Help Forum Smeg 612 ss leaking underneath

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #48861
    biffa
    Participant

    My trusty dishwasher is leaking dirty water from underneath. It’s the bottom right hand corner, where the waste pipe comes out and the feed goes in.

    Anything round there in particular which might be the culprit?

    thanks

    #297972
    biffa
    Participant

    Re: Smeg 612 ss leaking underneath

    An update: I took off the tray underneath and it was bone dry. Does this mean it is leaking from around the door?

    The goalpost seals I can see – any pointers on accessing the bottom door seal?

    #297973
    Penguin45
    Participant

    Re: Smeg 612 ss leaking underneath

    Crack in drain hose?

    Penguin45.

    #297974
    biffa
    Participant

    Re: Smeg 612 ss leaking underneath

    there appears to be more than 1 leak. The door seal had come unscrewed so fixing that has stopped the main leak. When you run a wash now it’s as dry as a bone.

    BUT when I move the dishwasher by lifting it slightly at the front to put it back in place I get a thin trickle of a dirty water leak from somewhere underneath. Is this usual? Do they leak if they are tilted?

    thanks

    #297975
    biffa
    Participant

    Re: Smeg 612 ss leaking underneath

    Is this the fill matrix?

    [/img]

    #297976
    Penguin45
    Participant

    Re: Smeg 612 ss leaking underneath

    Softener unit, yes it should full of brown sludge. Fill matrix is on the side othe machine – remove r/h side panel to view.

    Penguin45.

    #297977
    biffa
    Participant

    Re: Smeg 612 ss leaking underneath

    thanks Penguin – I’ve looked at the matrix and it seems OK. I’ve found a lot of dried gunk and a bit of moisture behind this round thing with the hoses going in. Can you tell me what it is, and whether they are known to leak?

    thanks

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.