Height reduction kit

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Height reduction kit

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • September 29, 2009 at 7:31 am #48924
    maltheviking
    Participant

    I need a height reduction worktop for a Hotpoint 9 series washer part no 9016 now obsolete. Can anyone recommend an alternative please?

    September 29, 2009 at 11:47 am #298193
    Phidom
    Participant

    Re: Height reduction kit

    I think I would just cut the edges off the original lid with tinsnips, drill some holes and screw it down.

    September 29, 2009 at 3:11 pm #298194
    maltheviking
    Participant

    Re: Height reduction kit

    Phidom wrote:I think I would just cut the edges off the original lid with tinsnips, drill some holes and screw it down.

    Brill idea, only problem the old tops gone walk about 🙁

    September 29, 2009 at 11:11 pm #298195
    Penguin45
    Participant

    Re: Height reduction kit

    Last one of those I had come in got chopped up and welded into the Wolseley……..

    Sorry,
    Chris.

    September 30, 2009 at 12:30 am #298196
    aqualectric
    Participant

    Re: Height reduction kit

    I’ve got a 95 series stacking kit……flat plate with the 2 white painted runners either side. It is lid sized with the fixing lip at the back. Would need to be screwed down at the front.
    PM me if you want it.

    Steve.

    September 30, 2009 at 7:24 am #298197
    maltheviking
    Participant

    Re: Height reduction kit

    Penguin45 wrote:Last one of those I had come in got chopped up and welded into the Wolseley……..

    Sorry,
    Chris.
    There’s a first, a reduced height Wolseley 😆


    I have somewhere in my garage a worktop of a old Hotpoint Micro Profile, 1/2″ thick chipboard, looks like I will use it. Cheers all for the help 😉

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.