Beko WMA510 wash led lights on spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA510 wash led lights on spin

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 29, 2009 at 1:19 pm #48935
    Bernie
    Participant

    Beko WMA510 when you select spin and push start, wash led lights tries to spin slowly for about 30 sec then goes back to just tumbling, no spin.

    Is it the PCB? This seems to be a problem with these machines.

    Many Thanks
    Bernie

    September 29, 2009 at 4:27 pm #298238
    TheSpinDoctor
    Participant

    Re: Beko WMA510 wash led lights on spin

    Hi Bernie.

    Is there any laundry in the drum? If so, it could just be an unbalanced load but if not, yes the board is certainly a prime candidate. I have had several fail like you describe where they just tumble, try to ramp up speed but don’t actually spin & it is usually the board. If you need it, the part number is: 2822640073.

    Hope it helps.

    Best wishes.

    September 29, 2009 at 5:01 pm #298239
    Bernie
    Participant

    Re: Beko WMA510 wash led lights on spin

    There was washing in it but I took it out just incase it was oob, but it was still the same.
    Thank TheSpinDoctor for the reply

    Bernie

    September 29, 2009 at 5:16 pm #298240
    Galway
    Participant

    Re: Beko WMA510 wash led lights on spin

    possibly stuck on a cycle and customer forgot to cancel.i have come across this a couple of times with this model.

    September 29, 2009 at 6:18 pm #298241
    Bernie
    Participant

    Re: Beko WMA510 wash led lights on spin

    Thanks Galway but that was one of my first thoughts but alas no.

    Bernie

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.