Bosch error code

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #49263
    simtoms
    Participant

    pls could someone help with error code E2 on a Bosch KGU3201GB/01? Fridge is warm but freezer is fine. Thanks in advance…
    Simon.

    #299347
    lerch
    Participant

    Re: Bosch error code

    E2 shows high temperature in freezer section.

    #299348
    PINKY
    Participant

    Re: Bosch error code

    ‘e2’ is fridge evaporator sensor i thought? not a replacement part. If you fit a new main pcb [behind the facia] that cures the problem [sensor bypass sort of thing]

    #299349
    simtoms
    Participant

    Re: Bosch error code

    thanks very much. Will price up board replacement. 😯

    #299350
    simtoms
    Participant

    Re: Bosch error code

    just checking out on bsh web site. what does sensor part no. 031733 do (situated on left near salad box)? I take it the sensor thats faulty and causing the E2 error is separate and buried in the bowels of the fridge(?)…

    #299351
    lerch
    Participant

    Re: Bosch error code

    E1 is normally the fridge error just look in the user manual to be sure.

    #299352
    Vladd
    Participant

    Re: Bosch error code

    E2 is the evapourator plate sensor and is only accessible if you hack into the backwall. The posting about replacing the module is the correct solution.

    #299353
    PINKY
    Participant

    Re: Bosch error code

    Thats the fridge air temp sensor. You need a pcb!! 😉

    #299354
    simtoms
    Participant

    Re: Bosch error code

    PCB it is!
    😀
    Thanks v much.

    #299355
    lerch
    Participant

    Re: Bosch error code

    sensor is available as a spare part, look on the left hand side in fridge part number as per bosch website is :

    031733 Fridge and same for Freezer.

    Both changeable behind plastic cover.

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.