wdl520 and wdl540

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wdl520 and wdl540

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 13, 2009 at 3:01 pm #49286
    DAGAV
    Participant

    WDL520 and WDL540

    We have seen a few of these where all the lights flash (not an error code)
    both horizontal and vertical.
    Customer also complains of not drying but no error code, insulations checks on motor and heater elements ok.
    Module and smart card changed and still showing above faults.

    HELP!!!

    October 13, 2009 at 3:14 pm #299438
    don
    Moderator

    Re: wdl520 and wdl540

    Hi

    Moved to trade tech as you have trade access 😉

    Don

    October 19, 2009 at 7:27 pm #299439
    twinspark
    Participant

    Re: wdl520 and wdl540

    console board does thi 😀 s fault

    October 20, 2009 at 8:53 am #299440
    DAGAV
    Participant

    Re: wdl520 and wdl540

    Thanks.
    I’ll try that next time we see one

    March 17, 2011 at 1:41 pm #299441
    DAGAV
    Participant

    Re: wdl520 and wdl540

    Just thought i would post the outcome of this issue.
    Have found that the dryer NTC’s short or have a low insulation resistance reading after being in use for a while, this causes the lights to flash (not a fault code).
    Changed the dryer NTC and the machine works fine.

    March 18, 2011 at 9:40 pm #299442
    helo_75
    Participant

    Re: wdl520 and wdl540

    i posted on this very issue not so long ago

    theyre going down for laughs, and should always be the first point of call on these rank machines

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.