Creda W200FW Door Not Locking

This topic has 2 replies, 2 voices, and was last updated 16 years, 5 months ago by ashfordkent.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
October 22, 2009 at 2:56 pm #49527

ashfordkent
Participant

Got a Creda Washing Machine Model W200FW S/N 36 103819
Similar to Hotpoint WMA. When u Close Door and press start Button, Door Lock Light comes on and machine starts does a bit of a fill / wash but then Door lock light goes off and machine stops and you can open Door Straight away. Happens on anything you start on spin rinse ect. Tried a new lock but same thing. Is It The Board ? Cheers

October 22, 2009 at 3:27 pm #300159

iadom
Moderator

Re: Creda W200FW Door Not Locking

If the door latch spring is OK then its the board, quite common. 😥

Jim.

November 3, 2009 at 8:01 pm #300160

ashfordkent
Participant

Re: Creda W200FW Door Not Locking

thanks jim, new module sorted problem.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.