- This topic has 3 replies, 3 voices, and was last updated 16 years, 5 months ago by
.
-
Posts
-
hi, Im after part no for pressure switch (leaking) type that fits into sump housing and also motor part no, its an askoll thats fitted, are they cap start now?, and will that fit the same, the askoll has moulding through rear panel. anybody help, qualtex shows cap start type, part no 481236158434
cheers
Re: ignis 348 motor and press switch
yes motor will fit no probs motor plug fits ok there is an earth wire on old motor not connected that need to be put on and you will need 2 small self tap screw to lock motor in on rear panel the only problem is those stupid hose clips
Dave
Re: ignis 348 motor and press switch
cheers electofix, any ideas on pressure switch number, it was leaking, removed it, took it apart cleaned out fat deposits, but was still leaking, although not as bad, can I fit 481227128556 switch? that the only number I’ve found so far (whirlpool)
anyone help? 💡
- You must be logged in to reply to this topic.