Hotpoint WD420 Main PCB

Home › Forums › Public Support Forums › Spare Parts Help › Hotpoint WD420 Main PCB

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 24, 2009 at 2:20 pm #49587
    PaulGreyhead
    Participant

    Apologies if this has been asked before. (Tried searching but only one results page opens; when trying to get to page 2 etc the results have gone!)

    Anyway, I’m trying to find a main PCB for a Hotpoint WD420. I found one that is very similar here:

    http://shop.ukwhitegoods.co.uk/Washing+ … l+PCB.html

    In the picture the PCB has only one connector (lower left, white) whereas mine has two!
    (Mine does have the J10 connector mentioned)

    Can anyone help with the correct part please?

    October 24, 2009 at 4:14 pm #300342
    helo_75
    Participant

    http://www.emwelec.co.uk

    even if you bought one, you wouldnt be able to programme it without either a card reader and card or a laptop with emitt software

    emw will supply the right one, plug n play

    October 24, 2009 at 4:21 pm #300343
    PaulGreyhead
    Participant

    Re: Hotpoint WD420 Main PCB

    Many thanks for your reply.
    By plug and play do you mean the one from EMW will work without being programmed?

    October 24, 2009 at 4:30 pm #300344
    iadom
    Moderator

    Re: Hotpoint WD420 Main PCB

    That is correct but as this is an Indesit board it might be better described as plug ‘n’ pray. 😉

    October 24, 2009 at 4:46 pm #300345
    PaulGreyhead
    Participant

    Re: Hotpoint WD420 Main PCB

    Superb!
    Thank you very much for the info. Really appreciated.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.