Indesit WIDL102 washer/dryer flashing LEDs -> 1 and 3

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit WIDL102 washer/dryer flashing LEDs -> 1 and 3

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 26, 2009 at 8:38 pm #49625
    eqdrbb
    Participant

    Apologies if there is a list of the error codes somewhere, my googling fails me somewhat 🙂

    Washing machine ‘halted’ today with the 1st and 3rd LED’s flashing together with the rapidly flashing door-lock LED.

    Any idea what this translates to as a fault code?

    (These are the ‘function LED’s i.e those in a horizontal line over the control dials)

    (1 being Stain Removal, 3 Being Extra Rinse)

    Any help is much appreciated!

    October 26, 2009 at 10:37 pm #300468
    iadom
    Moderator

    Re: Indesit WIDL102 washer/dryer flashing LEDs -> 1 and 3

    1 + 3 is supposed to signify the pressure switch is not sensing.

    Could be pump or filter blockage, faulty pressure switch, blocked or split hose to the pressure switch, bad connections on main PCB or even the PCB itself.

    Be sure to pull the plug out if you intend to have a poke around.

    November 16, 2009 at 8:08 pm #300469
    eqdrbb
    Participant

    Re: Indesit WIDL102 washer/dryer flashing LEDs -> 1 and 3

    Seems the ole machine isn’t happy at all.

    Seems to now regularly stall with either 2+4 or 1+3 lit.

    Couldn’t see any obvious blockages / leaks.

    Rented accommodation so I guess its time to ring the land lord!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.