- This topic has 3 replies, 2 voices, and was last updated 16 years, 5 months ago by
.
-
Posts
-
been on m/pts, connect sites, and every thing else i’ve got to work with. what i need is the part no. for the little belows/pressure switch, which is on a tap off on the hose from the wash pump motor, to the top spray arm, this is obviousley a flow pressure switch which cuts out the element if no water or insuficient flow of water circulates in the dishwasher. has any body got the part no.
TELL..
ps. not indicated on the mediator section on the connect site.Re: i’m back about a Belling Dishwasher IDW604 (444445898)
You sure it’s not 082621305 ? That’s posn. 47 on the exploded. Otherwise, I hope it’s not that solenoid type thing on the circulation motor chamber which comes with the motor.
Mike.Re: i’m back about a Belling Dishwasher IDW604 ( 444445898 )
no thats the water level pressure switch, if you look at the drawing again mike it should be attached to the hose(45b) via a little spigot/junction, and it fits in there. so if no water in appliance it wont close contacts for live direct to the heater.
ps. just had stoves on phone it has been identified, as a beko part. no.672050210069, and the stoves no. is 082631725.
take note of the number, me thinks it could be a popular part, for when the heater does not work, and people order the pcb instead.
TELL..
- You must be logged in to reply to this topic.