- This topic has 2 replies, 2 voices, and was last updated 16 years, 5 months ago by
.
-
Posts
-
this is a mates machine i went to a few weeks ago, the door wasnt locking and all it would do is coast round and drain (which i thought strange cos u could open the door with the drum still moving?? health & safety??) until u opened the door and slammed it a few times until it locked then it would go, so i checked the tension on the door pecker which seemed fine then i replaced the interlock which seemed to cure the problem but it has re-occured now am i just unlucky with the new interlock or could it be someting else??
thanks paulRe: whirlpool awo10761
Hiya,
Have a look at the door, is it sitting centrally in the door recess?
The hinge may have closed up a little moving the door to the right.
Open the hinge a little or trim the plastic in the inner door where the latch rests against to let it spring over a little more.HTH
Brian 🙂Re: whirlpool awo10761
DentedPorsche wrote:Hiya,
Have a look at the door, is it sitting centrally in the door recess?
The hinge may have closed up a little moving the door to the right.
Open the hinge a little or trim the plastic in the inner door where the latch rests against to let it spring over a little more.HTH
Brian 🙂cheers i will give it a go 😉
- You must be logged in to reply to this topic.