- This topic has 1 reply, 2 voices, and was last updated 16 years, 5 months ago by
.
-
Posts
-
Hi, I have a DWI612C dishwasher that is giving me a major headache.
During a wash cycle I had water pouring out the bottom of the door. I opened the door and the machine was flooded. All five program lights are now permanently on and no program can be selected. When the door is closed the machine will start to pump out water, it’s also letting in water at the same time.
I have removed the PCB and noticed a burnt out resistor. I have replaced the resistor along with the capacitor next to it. However the machine still does exactly the same thing. Am I looking at buying a new PCB? Or could it be something else? Any help would be appreciated.
Thank youRe: Smeg DWI612C PCB
Run away fill is a board corruption issue. P/no is 816290672, an email to spares@ukwhitegoods.co.uk for prices and ordering.
Be very sure that you wish to proceed – SMEG parts are not cheap.
You might also like to have a read of THIS ARTICLE.
Penguin45.
- You must be logged in to reply to this topic.