Whirlpool Dishwasher ADP 6836WH

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool Dishwasher ADP 6836WH

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 10, 2009 at 7:12 pm #50045
    Spunch
    Participant

    Hi -I’m new to the forum today and hoping that I can get some help.

    I had an error code F4 today with the start light flashing 4 times, repeated. The dishwasher had rinse water in the base which wouldn’t pump out. I cleaned this out manually and removed all filters. they weren’t dirty as they are regularly cleaned. I blew down the outlet hose and was able to blow waste water into the sump, so no blockage there.

    I have the panels off (power off too) ready to take things apart. any ideas where I should start?
    Thanks

    November 10, 2009 at 7:20 pm #303136
    Penguin45
    Participant

    Re: Whirlpool Dishwasher ADP 6836WH

    Drain pump is accessible by removing the lower front cover plate. The pump is a twist fit. You’ll probably find some sort of foreign body.

    Power off first.

    Penguin45.

    November 10, 2009 at 8:34 pm #303137
    Spunch
    Participant

    Re: Whirlpool Dishwasher ADP 6836WH

    I took it off – it looked fine. anyhow when I put it all back together, bingo. Problem solved.
    Many thanks for your advice

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.