Indesit IDF125UK Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit IDF125UK Dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 12, 2009 at 10:31 am #50093
    OLLIE2806
    Participant

    Above dishwasher starts – drains, then fills as usual, (seems to fill to about the correct level) then just drains with lights 1 and 3 flashing (Wash and end light flashing)
    Any ideas?
    Thanks in advance
    Ollie

    November 12, 2009 at 10:58 am #303450
    iadom
    Moderator

    Re: Indesit IDF125UK Dishwasher

    OLLIE2806 wrote:
    Any ideas?

    Yes, check the Known Error Codes thread.

    Error codes

    November 12, 2009 at 11:43 am #303451
    OLLIE2806
    Participant

    Re: Indesit IDF125UK Dishwasher

    Thanks, It says check filters but i have checked for blockages etc but cant find anything, I have found that the ins readings are down at around 5.86 but when the heater is taken out the equaition its jumps up to around 519, Could that be throwing the board out?

    November 12, 2009 at 5:16 pm #303452
    iadom
    Moderator

    Re: Indesit IDF125UK Dishwasher

    The heater on this machine will often cause the electronics to choke if the insulation is suspect.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.