Stoves cooker indicator disks

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Stoves cooker indicator disks

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 12, 2009 at 2:05 pm #50099
    bubs
    Participant

    Hi,
    have had a call on a Stoves cooker 058552079 (E2H666EMDOA), most of the 8 indicators for the knobs have slipped. Is it practical to stick these or will i have to order new parts.
    Thanks
    Graeme

    November 13, 2009 at 11:52 am #303490
    electrofix
    Moderator

    Re: Stoves cooker indicator disks

    if this is the same as the ones i have in a local care home they are rubbish you have to change them and they are about £4 or 5 each

    there is a ‘D’ shaped hole in the middle that wears and you will never successfully glue it and if you do you may make more probs for the future

    have noticed some of the later ones they have reduced the diameter to reduce leverage but i await the next failure

    Dave

    November 14, 2009 at 12:59 am #303491
    wsts
    Participant

    They (sort of) fixed this problem with some adhesive washers with the D shaped hole in them which you stuck to the front of the indicator disc to strengthen them, didn’t work perfectly but was alot better than the disc alone.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.