Zanussi FJ1254 sticks on wash

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi FJ1254 sticks on wash

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 12, 2009 at 7:31 pm #50110
    RickT
    Participant

    Hi, This machine will intermittently stick on the wash after the heating cycle has ended.Machine seems to heat to temp but then will stay washing with no advance with no fault code displayed. By manually skipping to the rinse, it will randomly go into fault code E34 (analogue pressure switch fault). Would this fault cause the sticking wash or could a faulty ntc cause this even if its come out of the heating cycle.Any help appreciated.

    November 12, 2009 at 8:32 pm #303535
    TheSpinDoctor
    Participant

    Re: Zanussi FJ1254 sticks on wash

    Hi.

    Have you done an insulation test when it faults? I am wondering if the heater insulation is failing after use. The pressure sensor/switch is wired through the heater so this is a possible cause.

    November 12, 2009 at 9:42 pm #303536
    RickT
    Participant

    Re: Zanussi FJ1254 sticks on wash

    Yes, checked it first and after fault occured no problem there. Wondered if the pcb relay could be breaking down after a while. Haven’t visually checked this yet!

    November 14, 2009 at 6:52 pm #303537
    leavemetogetonwithit
    Participant

    Re: Zanussi FJ1254 sticks on wash

    When you say “no problem there” with heater insulation, don’t be fooled into thinking that just because it’s 20 or 30 times the safety limit, it isn’t causing your fault. 😉
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.