ZWD1470w – UK Whitegoods

This topic has 9 replies, 3 voices, and was last updated 16 years, 4 months ago by franz.

Viewing 10 posts - 1 through 10 (of 10 total)

Author

Posts
November 14, 2009 at 12:07 pm #50139

franz
Participant

Customer says when she starts it on a wash it will wash for about 10 mins then jump straight to spin cycle – any ideas guys?
Franz

November 14, 2009 at 3:22 pm #303742

electrofix
Moderator

Re: ZWD1470w

check your pm

Dave

November 14, 2009 at 3:54 pm #303743

franz
Participant

Re: ZWD1470w

Dave the link you sent is not working
Franz

November 14, 2009 at 5:05 pm #303744

electrofix
Moderator

Re: ZWD1470w

let me have your email

Dave

November 14, 2009 at 5:16 pm #303745

franz
Participant

Re: ZWD1470w

PM sent
Dave

November 14, 2009 at 5:44 pm #303746

electrofix
Moderator

Re: ZWD1470w

well you should have them now

sent them twice once as a 12mb file and again split in 2 in case you inbox could not cope

Dave

November 14, 2009 at 6:08 pm #303747

leavemetogetonwithit
Participant

Re: ZWD1470w

That’ll be another one o’ them dodgy drier elements.
Mike.

November 14, 2009 at 10:52 pm #303748

franz
Participant

Re: ZWD1470w

dodgy drier elements – enlighten me
Franz

November 15, 2009 at 12:12 am #303749

leavemetogetonwithit
Participant

Re: ZWD1470w

AEG/Zan/Lux washer driers of recent vintage with the double element with the terminals nearly touching the back of the split cabinet. You have to split the cabinet to get the element out. If it goes just a little bit low on your megger (e.g. 20 MOhm) it will cause the electronics to do strange things. Disconnect it and see if the machine then behaves normally.
Mike.

November 15, 2009 at 9:43 am #303750

franz
Participant

Re: ZWD1470w

Thanks Mike will try that
Franz
Author

Posts

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.