bosch halogen hob

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › bosch halogen hob

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 14, 2009 at 6:14 pm #50147
    thegeezerrr
    Participant

    hi there. i have just fitted the above hob and wired to one of the wiring layouts on the back. the one with the black out line. when i switch the rings on they will come on then switch off. i can do this on all the hot plates so its not tripping just switching the rings off. i have also tried wiring the other two ways on the back but nothing happens. i have also shown the suggested wiring to a sparkie mate of mine who said its right but still the problem..
    wiring is, live to 1,2, or 3 and links in the neutral between 4 and 5.. please help …cheers

    November 14, 2009 at 6:50 pm #303768
    superfix
    Participant

    Re: bosch halogen hob

    It’s supposed to “cycle” the plates….. otherwise everything would just boil over.

    November 15, 2009 at 6:48 pm #303769
    Hammertime
    Participant

    Re: bosch halogen hob

    I am assuming it is wired to the standard 3 wire, 230 volt uk supply. If it is then you would also need links to go in the live side also. Live to 1, then links from 1-2 and 2-3 (neutral into 4, then link from 4 to 5). As far as I know, without the links you will not get power to all rings.

    POWER OFF BEFORE PLAYING WITH THE SUPPLY 😀

    H

    November 16, 2009 at 1:27 am #303770
    Penguin45
    Participant

    Re: bosch halogen hob

    He’s got power to the plates. They will only function properly with a loaded saucepan on top – even then, they will still cycle.

    Penguin45.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.