Beko DRCS 68W Cond Dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko DRCS 68W Cond Dryer

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 18, 2009 at 1:39 pm #50238
    goosegreen
    Participant

    Replaced the heater assy on the above due to one of the stats going o/c, Now finding that it will heat for a bout 10 sec on any program then the heat turns off and the drying light flashes. Never worked on one of these before so a bit stumped as to the reason.


    Goose

    November 18, 2009 at 2:40 pm #304079
    loopey
    Participant

    Re: Beko DRCS 68W Cond Dryer

    its a sensor dryer , did you put wet clothes in in to test 🙂

    November 18, 2009 at 4:14 pm #304080
    goosegreen
    Participant

    Re: Beko DRCS 68W Cond Dryer

    Did try it with a couple of damp items and also on timed dry, I will get the customer to try with a fullload.

    Goose

    November 18, 2009 at 5:24 pm #304081
    Flyman
    Participant

    Re: Beko DRCS 68W Cond Dryer

    Timed dry still uses the sensor. If it doesn’t pick up damp clothes it will cut the heater off and continue for the set time with no heat.

    November 18, 2009 at 6:21 pm #304082
    goosegreen
    Participant

    Re: Beko DRCS 68W Condo Dryer

    Called the customer and asked her to try with a full load, But she just called me back and said its still cutting out the heat with the drying light flashing.

    November 18, 2009 at 11:29 pm #304083
    leavemetogetonwithit
    Participant

    Re: Beko DRCS 68W Cond Dryer

    Four relays on that board. I’d be looking there. Connect has the circuit diagram and exploded views on mediator. New board only £20+ trade.
    Mike.

    November 20, 2009 at 8:31 am #304084
    goosegreen
    Participant

    Re: Beko DRCS 68W Cond Dryer

    Going to call back on Monday to have another look, Would any one know were the drum sensor is, As thinking back I don’t remember seeing one on the top of the drum?.

    Goose

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.