Hoover HNL2126 dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover HNL2126 dead

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 18, 2009 at 4:18 pm #50244
    iadom
    Moderator

    Customer said it worked perfectly the last time it was used now its a dead as the proverbial Dodo.

    Doorlock, motor, heater, etc all check out. Power into main PCB but nothing else, no lights on at all.

    Suspect main board failure, unless you know better. 😉

    Jim.

    November 19, 2009 at 12:47 am #304099
    leavemetogetonwithit
    Participant

    Re: Hoover HNL2126 dead

    NLA @ Connect! Could it be buttons or ribbon connector?
    Mike.

    November 19, 2009 at 1:11 am #304100
    Penguin45
    Participant

    Re: Hoover HNL2126 dead

    49005261 or 97923904 or 97923714 are all programmed core boards for this one – need 31—– number to identify correctly.

    Chris.

    November 19, 2009 at 8:44 am #304101
    eastlmark
    Moderator

    Re: Hoover HNL2126 dead

    Jim, i know you said you tested the heater but try disconecting it completely and see if if comes to life. Just a tiny flicker of a megger needle to earth is enough to upset those boards IME.

    November 19, 2009 at 10:52 am #304102
    iadom
    Moderator

    Re: Hoover HNL2126 dead

    Thanks for all the replies, I did check on the price of the board and it was special order, POA at Masterpart. 😥

    All buttons and ribbon connector are fine.

    Got >999 on the heater, not even a flicker.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.