Bosch SGS 55C02GB/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS 55C02GB/01

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 20, 2009 at 6:23 pm #50304
    mike100
    Participant

    This D/W continues to fill and wash pump wont start.
    cleaned out pressure chamber that wasnt congested. Micro switch ok.

    Any help on this one please.

    Mike

    November 20, 2009 at 6:34 pm #304323
    nomadPaul
    Participant

    If the ‘check water’ light comes up then 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure it’ll be the flow rate meter thats gone faulty – Part no:424099 . It normally starts to fill but then gets stuck in a constant fill/drain cycle with the CW light lit up .

    Its the whilte cylindrical part fitted between the end of the inlet hose and the water matrix.

    November 23, 2009 at 11:09 pm #304324
    mike100
    Participant

    Re: Bosch SGS 55C02GB/01

    Thanks for that Paul. Ordering Impeller Jug.

    Cheers,

    Mike

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.