Srvis M6854 Door seal

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Srvis M6854 Door seal

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • November 20, 2009 at 8:28 pm #50307
    spimps
    Participant

    Can’t seem to track one down,not a common model.
    Anyone know of a supplier or have they disappeared due to them going bust.
    BG

    November 20, 2009 at 8:44 pm #304336
    bazza500
    Participant

    Re: Srvis M6854 Door seal

    Do you have part number or serial no. of machine?

    November 20, 2009 at 10:13 pm #304337
    spimps
    Participant

    Re: Srvis M6854 Door seal

    serial no is 20072302255 there is anothe number 010077284-01
    M6854W don’t recognise the seal from any other servis.
    Cheers
    BG

    November 20, 2009 at 11:51 pm #304338
    leavemetogetonwithit
    Participant

    Re: Srvis M6854 Door seal

    Have you looked at M6804W which indicates 5045173492011 on Connect.
    Or search Masterpart using drop down menu > engine no. > several beginning 0100772…
    There seem to have been quite a lot of Servis door seals, wouldn’t be surprised if many are pretty much interchangeable.
    Mike.

    November 21, 2009 at 7:43 am #304339
    spimps
    Participant

    Re: Srvis M6854 Door seal

    Contacted masterpart who aren’t able to help.
    It’s a large load machine with a bigger door.

    November 23, 2009 at 1:56 am #304340
    leavemetogetonwithit
    Participant

    Re: Srvis M6854 Door seal

    Could try a part number enquiry to Connect.
    Alternatively, could the old seal be repaired, at least temporarily? Or has it decomposed into goo over a considerable area?
    Mike.

    November 23, 2009 at 7:40 am #304341
    spimps
    Participant

    Re: Srvis M6854 Door seal

    leavemetogetonwithit wrote:Could try a part number enquiry to Connect.
    Alternatively, could the old seal be repaired, at least temporarily? Or has it decomposed into goo over a considerable area?
    Mike.

    It’s the lip thats gone soft,hard water here so I cleaned the glass which will hopefully make a difference.cant rotate it either.
    can’t do much more for them,thats life now I’m afraid.
    Plus side is the internet and this site does give the opportunity to check most avenues.

    November 23, 2009 at 10:43 pm #304342
    leavemetogetonwithit
    Participant

    Re: Srvis M6854 Door seal

    Had a Hotpoint WM series doing same last week. Boot seemed OK but would just let a couple of spoonfuls dribble down the front. Lip not distorted or rusty. Customer wasn’t concerned about it, happy to collect it with a towel, as she’s been doing for years. I was thinking maybe of “thickening” the glass up with a couple of layers of clear weatherproof tape which is used for repairs to greenhouses. Might work, might not. I might try it next time I see this.
    Mike.

    November 24, 2009 at 8:41 am #304343
    hyg-dip
    Participant

    Re: Srvis M6854 Door seal

    The part number you require is 404002800, sorry AWServices do not stock it, but in stock at Masterpart

    Sales

    November 24, 2009 at 9:26 pm #304344
    spimps
    Participant

    Re: Srvis M6854 Door seal

    hyg-dip wrote:The part number you require is 404002800, sorry AWServices do not stock it, but in stock at Masterpart

    Sales
    Thanks,Masterpart don’t ralise they have one that fits as I did ask them.
    Cheers
    Rob

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.