Hotpoint DI450UK.C no heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint DI450UK.C no heat

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 26, 2009 at 2:57 pm #50483
    robbra
    Participant

    Hi,
    Fifth led flashing (per customer). Goes through the wash but cold. Heater and toc under the tub both ok.
    I suspect the pcb with flying lead sensor.
    Can anyone confirm and is it part no. 143214 ?
    Thanks
    Rob

    November 26, 2009 at 4:23 pm #304946
    iadom
    Moderator

    Re: Hotpoint DI450UK.C no heat

    DI450UK.C is an Indesit and a Chinese made one to boot. 😥

    Need full serial number to ID correct PCB, there are two different ones.

    Before serial number 71105.9999 its a C00255860

    After serial number 71106.0000 its C00259736

    Changed one only yesterday for this exact fault.

    Jim.

    November 26, 2009 at 5:25 pm #304947
    robbra
    Participant

    Re: Hotpoint DI450UK.C no heat

    Thanks Jim,
    The first one. Did you get it from EMW as Connect is £72 +vat?
    Rob

    November 26, 2009 at 6:01 pm #304948
    iadom
    Moderator

    Re: Hotpoint DI450UK.C no heat

    Fortunately my was the other one which is less than half the price. List price is around £66.00 ex vat.

    Strangely its listed as NLA at Masterpart. :rolls:

    Not sure of EMW repair these. :con:

    November 26, 2009 at 8:49 pm #304949
    LJDomestics
    Participant

    Re: Hotpoint DI450UK.C no heat

    done one last week.

    doing another tommorow.

    November 26, 2009 at 10:52 pm #304950
    aqualectric
    Participant

    Re: Hotpoint DI450UK.C no heat

    Qualtex show the first one (C00255860) as NLA; but it is superceded by C00259736. Only £19.47 + VAT at Qualtex. Same is £24.34 from Connect. Both special order.
    BTW, Rob, Connect charging me £60.79 + VAT for C00255860 – where the hell did £72 + VAT come from? You’re being stitched, mate!! :snig:

    Steve.

    November 27, 2009 at 8:25 am #304951
    robbra
    Participant

    Re: Hotpoint DI450UK.C no heat

    Thanks all,
    Steve, stitched yes, even the replacement is £28.91 with Connect. EMW is £29.90 for repair.
    I think a word with John at MAS is due.
    Rob

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.