indesit w103

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit w103

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • December 2, 2009 at 7:09 pm #50634
    adv
    Participant

    customer says was clicking round. i went now door wont lock , tryed new interlock still same carbons ok . any ideas guys? 😆

    December 2, 2009 at 8:50 pm #305497
    A1TEC
    Participant

    Re: indesit w103

    Heater/Thermistor?

    December 2, 2009 at 9:49 pm #305498
    adv
    Participant

    Re: indesit w103

    wud that stop it locking tho?

    December 2, 2009 at 10:15 pm #305499
    A1TEC
    Participant

    Re: indesit w103

    Not certain about that, just thought it might be a safe mode, stoping the machine from running with a fault.

    Is there any flashing at the door lock light?

    December 2, 2009 at 10:27 pm #305500
    adv
    Participant

    Re: indesit w103

    none when you turn to dot it seems to reset ok just does nowt an wont lock

    December 2, 2009 at 10:32 pm #305501
    A1TEC
    Participant

    Re: indesit w103

    Would check heater and try new carbons, if the interlock you fitted is new you can rule that out.

    December 2, 2009 at 10:44 pm #305502
    adv
    Participant

    Re: indesit w103

    wonder if a open circuit pump wud cause this guy says was full o water when stopt?

    December 2, 2009 at 10:54 pm #305503
    A1TEC
    Participant

    Re: indesit w103

    😆 Forgot to mention the pump in my last post. 😳
    Good luck, lets know the outcome.

    December 3, 2009 at 11:38 am #305504
    twinspark
    Participant

    Re: indesit w103

    MOTOR OR MODUAL
    USES MOTOR NEUTRAL TO LOCK DOOR

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.