- This topic has 1 reply, 2 voices, and was last updated 16 years, 4 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
machine sends 240v to pcb, but no action via display board…changed pcb inc display board same fault..checked wiring and pump/heater/valves/ect no faults found..checked the base thermister reading about 75 ohmes, it seem high not sure if this is the fault or not !! John
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.