BEKO DWD5410s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO DWD5410s

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 4, 2009 at 6:41 am #50673
    johnnyhoz
    Participant

    went to this Beko thats not heating, the heater element checks out ok but can’t see the stat, any ideas where its located please

    John

    December 4, 2009 at 1:12 pm #305610
    A1engineer
    Participant

    Re: BEKO DWD5410s

    these are prone to pcb failure causing no heat, trouble is there is about 4 or 5 different boards depening on serial etc.

    December 4, 2009 at 1:20 pm #305611
    johnnyhoz
    Participant

    Re: BEKO DWD5410s

    Thanks A1
    will get the info and order a pcb

    John

    December 4, 2009 at 1:21 pm #305612
    bazza500
    Participant

    Re: BEKO DWD5410s

    I would look at the PCB first as everyone I have had with those symptoms has been a dry joint which a bit of solder fixed.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.