- This topic has 1 reply, 2 voices, and was last updated 16 years, 4 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Machine set on NORMAL runs for about 1 min then stops with ANTI CREASE FINISH light lit.
Found Heater stat to be faulty.
By passed stat to test ,but machine still stops after about 1 min.
Does the machine require a load in the drum for it to run normally.
MIKE 🙁 🙁 🙁
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.