Baumatic BDW9

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Baumatic BDW9

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 7, 2009 at 12:27 pm #50729
    silverbroom
    Participant

    Going to this tomorrow, customer says dishwasher stops after a few min’s with error code E1 (no water/check water supply) but water is in machine.

    Does this model have a flow meter?.

    Thanks, silverbroom

    December 7, 2009 at 3:47 pm #305760
    lee8
    Participant

    Re: Baumatic BDW9

    If I remember correctly its in the side tank on the left lookin from the front.

    They do fail regularly and come in the tank.

    December 7, 2009 at 6:04 pm #305761
    silverbroom
    Participant

    Re: Baumatic BDW9

    Thanks for that, check it out Tuesday.


    silverbroom

    December 7, 2009 at 11:11 pm #305762
    admin
    Keymaster

    Re: Baumatic BDW9

    Nah not in a BDW9 its in front behind panel…..also has pressure switch to top up in front on r/h side pull hose off pressure switch and blow through it….may solve the problem….but will E1 if takes too long to fill

    December 8, 2009 at 12:37 am #305763
    Penguin45
    Participant

    Re: Baumatic BDW9

    No flow meter on this one. P/sw or logic error.

    Chris.

    December 14, 2009 at 4:14 pm #305764
    silverbroom
    Participant

    Re: Baumatic BDW9

    Thanks for the input, at this today due to customer changing appointment.

    For some reason a connection from loom to P/Switch had worked it’s way off, so reconnect test on cycle, job done.

    Thanks once again.


    silverbroom

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.