- This topic has 8 replies, 4 voices, and was last updated 16 years, 4 months ago by
.
-
Posts
-
Pnc 914 002 096 01.
Stopped with start light flashing, diagnostics throws up E51. Motor triac short circuit.
Due to the thoughful kitchen fitters I can’t get the machine out until they return to remove the laminated floor. :rolls:
Is this likely to be just the PCB that has failed or will something on the motor have taken it out. ❓
Jim.
Re: AEG 72630 E51
E51 could be the PCB, Jim; but more likely the motor or wiring is shorting to earth. The “motor triac is in short circuit” is generally a motor failure TBH.
Steve.
Re: AEG 72630 E51
Had E54 today on 4 y o Bendix. Took nearly half an hour with the 2kW hair dryer directed at the motor to sort it out.
Mike.Re: AEG 72630 E51
Went back today, although the motor looks perfect and the brushes are hardly worn the field coil has a dead short to earth.
Says its to expensive to continue. 😥
Re: AEG 72630 E51
With motor being £168 odd incl vat 😯 trade from Connect, I think I’d agree. Had a Beko with same problem this week, they gave me the go-ahead for new motor at £110 RRP 😯 . I had a quick look and found a secondhand one on e-bay which was lucky. It’s on its way. (There was even a place in London selling “reconditioned” Beko motors, same part, for £34 incl post!)
Mike.Re: AEG 72630 E51
I guess they thought, “As we’ve got to have the laminated floor removed every time to get it out (£££) we might as well have a new one to lessen the likelihood of it having to come out again soon.” 😆
Mike.
- You must be logged in to reply to this topic.