Fisher paykel DD605H

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Fisher paykel DD605H

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 11, 2009 at 5:47 pm #50885
    S1MON
    Participant

    Fisher twin draw

    Intial fault tap light on bottom draw flashing, softener was blocked and fill hose rapidly expanding.

    Went back today replaced softener but still appears restricted. Removed again, no water is getting too the dispenser and the inlet hose is still expanding. Cleaned dispenser and removed and cleaned valves.

    Have checked operation of top draw to compare and you are getting water flowing throught the dispenser.

    Any clues, this softener came with new filter.

    December 13, 2009 at 4:50 pm #306241
    jwd_73
    Participant

    Re: Fisher paykel DD605H

    I would unclip the inlet hose from the softener and aim into large bowl or bucket and run the valve in diagnostics to make sure there is not a blockage in the hose. I have seen it once where the hose was blocked with green particles.

    December 13, 2009 at 6:14 pm #306242
    S1MON
    Participant

    Ill give that a shot

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.