Hotpoint WMM75A No motor action

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WMM75A No motor action

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 12, 2009 at 11:02 am #50900
    Bernie
    Participant

    Have Hotpoint WMM75A with no motor action either on wash or spin have checked brushes motor windings and wiring to motor plug there is no fault code either, you can hear the relay on the board click for change of motor direction.

    Anybody have any other suggestion I can only guess it must be the board.

    Thanks for looking
    Bernie

    December 12, 2009 at 6:18 pm #306281
    johnnyj
    Participant

    Re: Hotpoint WMM75A No motor action

    I f you hear the relay clicking i would be thinking it is more than likely a wiring or motor faultrather than the module, JJ

    December 13, 2009 at 1:05 am #306282
    leavemetogetonwithit
    Participant

    Re: Hotpoint WMM75A No motor action

    You didn’t mention it but I assume you checked tacho.
    Mike.

    December 14, 2009 at 6:44 pm #306283
    Bernie
    Participant

    Re: Hotpoint WMM75A No motor action

    Thanks for the replies and no I had not checked the taco.

    Thanks again
    Bernie

    February 18, 2010 at 8:50 pm #306284
    Bernie
    Participant

    Re: Hotpoint WMM75A No motor action

    Mike you got this one right, both wires to the taco were broken at the taco end.

    Thanks

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.