- This topic has 5 replies, 2 voices, and was last updated 16 years, 3 months ago by
.
-
Posts
-
hi guys i.m new to the site , ive been working on a de dietrich vz 9999u1 the initial problem was with the water not heating , so i ordered a new element (after checking the old one had no continuity) and fitted it , i turned on the washer for a quick wash and it started up and took in water did a quick rinse and stopped after about 10 mins. so i decided to do a full wash but low and behold nothing is happening , all the program buttons are working fine and the start light comes on but when the door closes the light goes out and no cycle starts i am finding it impossible to get any info on the net about this brand and ive gone through the diagnostic in the schematics the only thing i can see is the salt light is flashing on and off ?? any one got any ideas i would be grateful thanks in advance 😥
Re: de detrich dishwasher
That model is a Fagor-build; commonest reason for no-start is water in the tray under the machine operating the flood protection system.
Penguin45.
Re: de detrich dishwasher
cheers mate i’ll try that in the mornin , do i need to get the dishwasher out of the kitchen units to get underneath it ?
Re: de detrich dishwasher
You can do a basic observation through the front lower access panel – anything more and it’ll have to come out.
Penguin45.
Re: de detrich dishwasher
hi guys , had another go at the dishwasher today turns out water in the tray was the problem penguin cheers mate had some effin trouble gettin it in and out of the units twas mounted up on a piece of counter top under the legs and they were seized !! i gave a good hour tryin to get at it all worked out in the end though thanks for a speedy reply fellers
- You must be logged in to reply to this topic.