Whirlpool ADG 7460

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #51000
    Bullseye
    Participant

    Any help please ?. On any cycle it does it’s initial drain,fills,then drains again and gives four beeps as if it’s finished !.Tricked it into thinking door was closed by flicking the door latch,watched it fill from hole in left side of sump,a small trickle also came from the thing that looks like a plug hole a few inches up on the left hand side panel.No flashing lights,just the four beeps as if it’s finished,any ideas anyone ?.

    #306573
    Penguin45
    Participant

    Re: Whirlpool ADG 7460

    Sounds like a logic error – pcb almost certainly; but a check of the heater for earth breakdown and leakage into the tray under the machine is a must-o before splashing out.

    Power off if you intend to sort this yourself.

    Penguin45.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.