Unkown element required.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Unkown element required.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • December 17, 2009 at 4:57 pm #51031
    iadom
    Moderator

    Oven is branded a Eurolec. Customer had an element fitted a couple of years ago. Looking at the rather moth eaten invoice he showed me I can make out what appears to be a part number.

    2.1EF5002130. Does that ring any bells with anyone?

    Jim.

    December 17, 2009 at 5:04 pm #306676
    don
    Moderator

    Re: Unkown element required.

    There is a 2.12EFS002130 in the here in the shop Jim which fits some Eurolec machines 🙂 it could be the same 😉

    Don

    December 17, 2009 at 5:27 pm #306677
    iadom
    Moderator

    Re: Unkown element required.

    Thanks Don, I entered that number at Masterpart and drew a blank. 😥

    Don’t suppose you know of a Qualtex or Masterpart alternative, I need one fairly soon. 😉

    Jim.

    EDIT. found it under Siltal at Masterpart. Good news, its a decent price, bad news, its out of stock. 😥

    December 18, 2009 at 8:05 am #306678
    hyg-dip
    Participant

    Re: Unkown element required.

    The correct part number is 2.12EFS002130, sorry we are out of stock at the moment, AWServices

    December 18, 2009 at 9:52 am #306679
    kwatt
    Keymaster

    We’ve got a few on the shelf Jim if required.

    K.

    December 18, 2009 at 4:57 pm #306680
    Dave_Conway
    Participant

    Re: Unkown element required.

    You can use Beko 462900010 as well 😉

    Same wattage just hasn’t got the fixing opposite the terminals.

    Dave.

    December 18, 2009 at 7:01 pm #306681
    iadom
    Moderator

    kwatt wrote:We’ve got a few on the shelf Jim if required.

    K.

    Might have to drop Dave a line later. just got back from a full days Christmas shopping at the Trafford Centre. I usually go on my own every year and do the whole lot in one go. Took the wife this time, big mistake. 😥

    Got there before 10.00 AM as usual but didn’t manage to drag her out the clothes shops until 4.45PM. hit the M60 at rush hour plus two RTA’s on the clockwise section. Took me 90 minutes to do a 25 minute trip. :rolls:

    Got to drive to Darwen in an hour, the daughters rock band is doing a gig at The Crown Inn.

    A hell of a lot harder than working.

    Knackered Jim.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.