Indesit WIL123S Fault

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit WIL123S Fault

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 17, 2009 at 10:38 pm #51046
    limc1981
    Participant

    Please help!!!

    I have an Indesit 1200 WIL123S washing machine and when i turn it on there are two LED lights flashing

    * EASY IRON & DELAY TIMER as well as the red power light.

    It starts to work for about 2 minutes and then these lights begin to flash and the machine stops altogether.

    Can you please tell me what the fault is and if i can repair it myself???

    Thank You xx 🙂

    December 18, 2009 at 12:02 am #306722
    iadom
    Moderator

    Re: Indesit WIL123S Fault

    Can you give us the lights by number from top to bottom or left to right please.

    December 18, 2009 at 12:06 am #306723
    limc1981
    Participant

    Re: Indesit WIL123S Fault

    It is the 1st and the 3rd from the left?

    Any help would be much appreciated!

    Thanks

    December 18, 2009 at 1:36 am #306724
    Penguin45
    Participant

    Re: Indesit WIL123S Fault

    Water level control is not working – level not detected in the time allowed. Pressure switch may be faulty, air hose may be holed or the air bell in the bottom hose may be clogged.

    Power off if you intend to sort this yourself.

    Penguin45.

    December 18, 2009 at 10:16 pm #306725
    limc1981
    Participant

    Re: Indesit WIL123S Fault

    The hose at the back doesn’t come out? How do i check if it is blocked?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.