BRANDT WM Continuous pumping

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BRANDT WM Continuous pumping

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 21, 2009 at 6:50 pm #51115
    garn
    Participant

    hi Merry Xmas Folks. 🙂

    I’m I’m Desperate Need For A Manual To Select The Test procedure For This Appliance.

    Its A Brandt WFL1261u . 00 206 019 02.

    Theres No Drum Action Totaly dead bar The Pump Is Going No Matter What Program you Select.

    There is A hell of A Price On The Board To :rolls:

    Thanks garn…

    December 21, 2009 at 9:08 pm #306968
    eastlmark
    Moderator

    Re: BRANDT WM Continuous pumping

    take the board out of its box, its probably blown to hell on the underside. Usual cause is blocked dispenser syphon tube causing leak onto interlock. Given ciost of parts its a sad end for a great machine.

    December 21, 2009 at 9:37 pm #306969
    garn
    Participant

    Re: BRANDT WM Continuous pumping

    eastlmark wrote:take the board out of its box, its probably blown to hell on the underside. Usual cause is blocked dispenser syphon tube causing leak onto interlock. Given ciost of parts its a sad end for a great machine.

    Thanks Mate.

    I had a Kwik Look at The Board To day Could see Nothing no dry Joints Either.
    Although The Customer Reported Today That The Pump Chamber Had been Full And he had Some Coins Out of It Before I called.

    When Testing This Appliance To Day The Door Lock Light Was Energized
    But to Your Left There Was A Padlock Illuminated I Assume It Was Child Lock But Couldn’t get it Off.

    Thanks Garn…

    December 22, 2009 at 12:42 am #306970
    Penguin45
    Participant

    Re: BRANDT WM Continuous pumping

    P/sw jammed on full or flood protect?

    Chris.

    December 22, 2009 at 11:40 am #306971
    garn
    Participant

    Re: BRANDT WM Continuous pumping

    Penguin45 wrote:P/sw jammed on full or flood protect?

    Chris.

    Thanks Chris.

    il have a Good look at IT Today. But No p Switch in Stock Anywhere :rolls:

    Merry xmas Paul

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.