samsung P1253

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › samsung P1253

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 22, 2009 at 1:53 pm #51133
    barryfast
    Participant

    When spin is selected, the time goes as far as 9 minuets but then goes back to 10. Not motor brushes or pump. Any ideas?
    Thanks
    Barryfast

    December 22, 2009 at 8:43 pm #307035
    Lawrence
    Participant

    Re: samsung P1253

    PCB probably

    December 23, 2009 at 6:40 pm #307036
    barryfast
    Participant

    Re: samsung P1253

    put one in still did it barryfast ❓

    December 23, 2009 at 10:37 pm #307037
    leavemetogetonwithit
    Participant

    Re: samsung P1253

    Could try the old method of going round disconnecting things (I’m especially thinking heater element) until machine starts to behave.
    Mike.

    December 26, 2009 at 3:12 pm #307038
    expertcat
    Participant

    out of balance load detection?

    December 27, 2009 at 11:09 am #307039
    lerch
    Participant

    Re: samsung P1253

    AS above if load cannot be balanced it will reset time and try again.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.