WFF1800gb/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WFF1800gb/01

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 29, 2009 at 4:03 pm #51230
    timdowning
    Participant

    Never had this fault before;

    Whatever programme you select the timer just advances to the spin. It does the spin fine.

    Have tried resetting the programme, this machine has a selector and a timer.

    I have checked the obvious and all seems ok. I am assuming timer at fault.

    Any thoughts please.

    December 29, 2009 at 4:16 pm #307321
    Martin
    Participant

    Re: WFF1800gb/01

    timdowning wrote:Any thoughts please.

    I’m thinking it could be that the air chamber is gunged up, that the heater may be o/c or duff inlet valve? Because usually with this model if there is a fault detected somewhere it just advances to spin anyway!

    HTH?

    December 29, 2009 at 4:36 pm #307322
    timdowning
    Participant

    Re: WFF1800gb/01

    I thought the same. Valves, heater, pump all ok. I did wonder about the thermistor and pressure switch but didn’t venture that far.

    With the timer at £214 I didn’t want to write it off until I was sure.

    Thanks.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.