- This topic has 2 replies, 2 voices, and was last updated 16 years, 3 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
My Firenzi FIDW42 is not heating up water. Originally, it failed to heat on the 65 C cycle but it still worked at 50 C. Now it doesn’t heat on either cycle.
I assume it’s a faulty heating element. Does anyone know where this is and how to get access to it?
Many thanks.Re: Firenzi FIDW42 not heating
It’s a Zanussi in a dress. Heater is most easily accessed by removing the r/h side panel and the rear cover panel. Check for burnt-out wiring; resistance through the heater should be c. 25 ohms.
Most likely candidate is a burnt-out solder joint on the pcb.
Stay safe – power off if you intend to deal with this yourself.
Penguin45.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.