Long capillary freezer thermostat

Home Forums Trade Technical & Spare Parts Forums Trade Spare Parts Long capillary freezer thermostat

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #5156
    Dave_Conway
    Participant

    Could anyone check if they know of a freezer thermostat with standard signal, similar to Danfoss No6 or Ranco VS5 with a capillary around 2.5m. Most of the usual one’s I have are around the 1m-1.5m length.

    I haven’t checked a Danfoss yet as I don’t have one here, but they look longer than the Ranco on the picture.

    Thanks in adavance.

    Dave.

    #109298
    Alex
    Participant

    Re: Long capillary freezer thermostat

    Distriparts do one part No. 50058581005 superseded to 50059587001. According to my link to Distri, they are out of stock. Worth a shot with W/Vac or Connections. Capillary length 2650 mm

    #109299
    Dave_Conway
    Participant

    Re: Long capillary freezer thermostat

    Thanks Alex 😀

    It’s a special from Washvac and Connect so I’ll place one on backorder with Distri.

    Dave.

    #109300
    Tinhips
    Participant

    Have you tried Maddocks

    #109301
    Dave_Conway
    Participant

    Tinhips wrote:Have you tried Maddocks

    No, I haven’t TBH, I don’t order a great deal from them anymore, they were once our biggest supplier, sadly they have fallen behind the competition as far as software and ease of ordering goes, but I will check to see if they have a long capillary stat, thanks for the reminder.

    Dave.

    #109302
    Tinhips
    Participant

    Dave like you I only use Maddocks occasionally mainly for the out of the ordinary parts.

    #109303
    Dave_Conway
    Participant

    Tinhips wrote:Dave like you I only use Maddocks occasionally mainly for the out of the ordinary parts.

    Maddocks are actually very cheap for the likes of Bosch and Miele spares, same part from the same factory in a different box, especially pumps and door seals.

    Dave.

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.